A T-Post build fence is your best option for a cost-effective fence that offers longevity and durability. And for the inexperienced looking for the perfect DIY fence project, a T-Post Topper^™ built fence is quick and easier to install than most products available.

Ready to Build your T-Post Topper^™ Fence?

1. Check your tools; you will need Measuring Tape, Post Driver or Mallet, String, and Spirit leveler (Optional, cement, and spade)
2. Measure the desired area you plan to enclose. Plan to install a T-Post & T-Post Topper^™ every 6 to 8 feet. Decide on the fencing wire you will use.
3. Shopping list: T-post, Cable ties, Rolled or Fencing panels (Cement optional). Remember to order your T-Post Topper^™ here.
4. Lay out your corner T-Post and mark the spot; running a string, mark the line of your intended fence.
5. Measure out your desired length between posts and mark each spot.
6. Using your Post Driver or Mallet, insert each T-Post into the soil, burying at least two feet.
   Use your leveler to ensure each Post is installed straight. Important: make sure each T-post faces the same direction.
7. Once each T-Post is securely installed, attach your T-Post Topper^™ to each T-Post.
8. Run your desired fencing wire or panel, securing with cable ties to each T-Post. For the best results be sure that your fencing is taut.
9. Run your desired wire option through the pre-cut sections of the T-Post Topper™. (For low-voltage electric fencing, see the Charging manufacturer’s instructions.)
10. Sit back and enjoy the security of your new T-Post Topper^™ built fence.